Grade 347h stainless steel
Alloy 347H (UNS S3409) stainless steel plate is the higher carbon (0.04 – 0.10) version of the alloy. It was developed for enhanced creep resistance and for higher strength at temperatures above 1000°F (537°C). In most instances, the carbon content of the plate enables dual certification.
Application:
·Chemical Processing
·Food Processing - equipment and storage
·Petroleum Refining - fluid catalytic cracking units, polythionic acid service
·Pharmaceutical Production
·Waste Heat Recovery - recuperators
Machinability
Machining grade 347H stainless steel is slightly tougher than that of grade 304 steel. However, the hardenability of this steel can be minimized by the use of constant positive feeds and slow speeds.
Introduction
Stainless steels are high-alloy steels which have high corrosion resistance than other steels owing to the presence of large amounts of chromium in the range of 4 to 30%. Stainless steels are classified into martensitic, ferritic and austenitic based on their crystalline structure. In addititon, they form another group known as precipitation-hardened steels, which are a combination of martensitic and austenitic steels.
The following datasheet will provide more details about grade 347H stainless steel, which is slightly tougher than grade 304 steel.
Physical Properties
The physical properties of garde 347H stainless steel are given in the following table.
Mechanical Properties
The mechanical properties of grade 347H stainless steel are displayed in the following table.
Mirror BA 2B NO.1 NO.3 NO.4 8K HL 2D 1D
Hair line
Titanium plating
Anti-skid plate
Grade 347H stainless steel is unresponsive to heat treatment. The hardness and strength of the steel can be increased through cold working.
Grade 347H stainless steel can be welded using most of the resistance and fusion methods. Oxyacetylene welding is not preferred for this steel.
Forging, upsetting and other hot work processes can be performed at 1149 to 1232°C (2100 to 2250°F). The grade 347H steel has to be water quenched and annealed to obtain maximum hardness.
Grade 347H stainless steel can be annealed at temperature ranging from 1010 to 1193°C (1850 to 2000°F) and then quenched with water.
Packing for stainless steel sheet 347h stainless steel factory prices as below:
Packing Details : Standard export seaworthy packing (with waterproof paper, metal belt pack sheet, then put them in wooden pallet, then put in container) or customized.
PALLET WEIGHT:2.5 MT - Max. (stainless steel sheet).
MARKING/LABELLING ON PACKAGING:Yes.
More Details: 20 ft container - GP: 5.8m (Length) * 2.13m (Width) * 2.18m (Hight) ------ Max Gross Weight: 25MT/container.
40 ft container - GP: 11.8m (Length) * 2.13m (Width) * 2.18m (Hight) ------ Max Gross Weight: 27MT/container.
40 ft container - HG: 11.8m (Length) * 2.13m (Width) * 2.72m (Hight) ------ Max Gross Weight: 27MT/container.
Delivery Details : 3-5days normally.
1. Materials for packaging
(a)angle bars:
(b)Function:Angle bar have very good protection to be used for fixed the four side edge of the steel plate and preventing the damages of loading and unloading process.
2. Materials for packaging
(a):plywood
(b)Function:at the top of each wooden pallet will be put a whole piece of plywood to protect the stainless steel sheet surface keeping smooth,no scratch,and in good condition.
3. Complete package(2.5T max.)
Products are packed and labeled according to the regulations and customer's request.
Grate car is taken to avoid any damage which might otherwise be caused during transportation.
4. Loading into container
5. Steel wire rope reinforcement
6. Finish Loading
HL Surface Stainless Steel Sheet
Anti-skid Stainless Steel plate
Stainless Steel Coil
TP INOX Co., Ltd, provides considerable quantities of hot and cold rolled stainless steel coils and sheets of grade 304、304L、316L 、321、310S 、2205 double stainless steel 、special stainless steel contain high nickel and 430、201 for a long time. The thickness of cold roll coils are from 0.4-5.0mm；Hot roll coils are from 3.0-100mm (including original plates). Our products could serve customers who engage in machine manufacture, kitchen and bathroom utensils, electric equipment, elevator, shipbuilding, chemical tank, decoration of building construction, industry of welding pipe and automaker etc., TPINOX always do our best to provide the most high quality services with convenience and efficiency.
Contact us:
TP INOX CO.,LTD (cilck to contact us)
Phone ：86-510-83631805
Fax ：86-510-83631827
Contacts：CarlyChen 86-15358055878
Email: tpinox.carly(@)qq.com ; tpinox.carly(@)foxmail.com; carlychen(@)alibabatpinox.com
Skype:+86 15358055878
Wechat id: tpinoxcarly
Q: Are you trading company or manufacturer ?
A: We are Manufacturer.
Q: How long is your delivery time?
A: Generally it is 3-5 wirking days if the goods are in stock. or it is 15-25 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or not?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=10000USD, 100% in advance. Payment>=10000USD, 30% T/T in advance ,balance before shippment.
We also accept LC at sight.If you have another question, pls feel free to contact us as below:
WUXI TP INOX CO.,LTD (click to contact us)
Address:：No.403,East Steel Market.,Dongbeitang Town Wuxi City,Jiangsu Province,China(PC214191)
Phone ：+86-510-83631805
Fax ：+86-510-83631827
Mobile:+86-15358055878
Wechat: tpinoxcarly
Email:m15358055878(@)163.com;carlychen(@)alibabatpinox.com
QQ:2448144366 ;Skype:+86 15358055878
| 담당자 : | Greg Cheng |
|---|
